VP
The heat magazineNº 01October 2026

Varmepumper.eu

Q-Tech – the key to an efficient heat pump

Snit gennem Oventrop ventilindsats med Q-Tech til automatisk indregulering

A heat pump is only as good as the system it is connected to. If the water is unevenly distributed across radiators and underfloor heating, the flow temperature has to go up – and efficiency goes down. With Oventrop Q-Tech, hydronic balancing is built into the valve itself, and it holds even when the pressure in the system fluctuates.

Heat pumps need the right flow

A heat pump works with low temperatures and small temperature differences between flow and return. In return, a lot of water circulates, so distribution is everything. If the radiators close to the heat pump get too much water and the distant ones too little, some rooms become too warm and others too cold. This is often solved by raising the flow temperature, but every extra degree costs efficiency – and therefore electricity.

With correct hydronic balancing, every radiator and every underfloor heating circuit gets exactly the flow it needs. The heat pump can run at the lowest possible temperature, the rooms reach the right temperature, and there is no flow noise in the valves.

How Q-Tech works

  • The flow is set steplessly with a setting key, and the value can be read from the outside.
  • The valve automatically maintains the set flow, independent of differential pressure, up to 1.5 bar.
  • The flow holds even when other thermostats in the house open and close.
  • No presetting calculations are needed beforehand.

Ready for existing systems

When a heat pump is connected to an older radiator system, the pipe layout is rarely known. That is not a problem with Q-Tech, because it can be retrofitted even where the pipe network is unknown. This makes Q-Tech an obvious choice when switching to a heat pump, and when a heat pump is combined with the existing boiler in a hybrid solution.

Oventrop Q-Tech from Arne Nielsen A/S

Thermostatic valves, valve inserts, underfloor heating manifolds and connection fittings with Q-Tech. See versions and item numbers at Arne Nielsen A/S.

Questions and quotations: info@arnenielsen.dk

Radiators, underfloor heating and cooling

Q-Tech is available in four product groups, so the entire hydronic system can be balanced automatically:

  • Thermostatic valves AQ, AQH and EQ for radiators, flow 10–170 l/h. AQH handles 35–420 l/h and can also be used for cooling, which makes it a natural fit for a reversible heat pump.
  • Connection fittings Multiblock TQ, Multiblock TQ-RTL and Multiflex FQ for valve radiators.
  • Multidis SFQ underfloor heating manifold with flow indicators, 2–12 circuits. Underfloor heating is the heat pump’s best partner.
  • Unibox TQ and TQ-RTL for controlling underfloor heating in individual rooms.

Calculate, balance and document

The system can be sized and the balancing documented with Oventrop’s calculation software OvPlan. If you want to measure the result after commissioning, you can do so with Oventrop OV-DMC 3, the subject of the next post in the series.

Lower flow temperatures – the green transition in practice

A balanced system lets the heat pump deliver more heat for every kWh of electricity. That means lower running costs, better comfort and a heat pump that delivers what it promises.

Read more on varmepumper.eu

Source and photo: Oventrop GmbH & Co. KG. Next post in the series: Oventrop OV-DMC 3.